Cat5e UTP one foot extension cable, RJ45 male (no boot) straight through to female jack.

Outdoor, 2.3-2.7/4.9-6.1 GHz, triple-feed, 5 dBi, 120 deg, sector antenna with reverse polarity type-N plug connector (for AP3660, direct attach)

Drop ceiling 9/16rail mounting bracket (verify models supported)

Indoor, 2.4GHz / 5GHz, Quad-feed, 4 dBi, Omni

Indoor, 2.4-2.5/4.9-5.9 GHz, Triple-feed, 3/4 dBi, Omni, Ceiling (for AP3620)

Outdoor, 2.4 Ghz, 10dBi, omni baton with reverse polarity type-N jack connector(for AP3660) - FCC domain only

Adjustable drop ceiling bracket for AP3710

Universal mounting bracket adapter for existing installs (Cisco, Aruba, Trapeze, Roamabout) - Refer to manual for specific access point model support

1ft, PFP400 cable with standard N-type plug and reverse polarity N plug connectors

Outdoor, 5.15-5.875 GHz, Dual-polarization 16 dBi, 60deg, Sector (for AP3620/AP3640/AP3660)

In/Outdoor, 2.3-2.5 GHz, 18 dBi, 18 deg, Panel (for AP2620/AP3660) - FCC Domain Only

20 ft, LMR200 cable with standard N-type plug and standard N-type jack connectors

Indoor, 2-3-2.7/4.9-6.1 GHz, Triple-feed, 5 dBi, 120 deg, Sector (for AP3620)

6 ft, LMR400 cable with a standard N-type plug and standard N-type jack connectors

AP3705i Protruded Drop Ceiling Bracket

Indoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 7dBi, 27/30 deg, panel with reverse polarity SMA plug connectors

75 ft, LMR400 cable with standard N-type plug and standard N-type jack connectors

Access point antenna port terminator (R-SMA plug 50 OHM 1W). Required to terminate unused ports in outdoor installations.

Outdoor, 5.7-5.8 Ghz, 10dBi, omni baton with reverse polarity type-N jack connector(for AP3660) - FCC domain only

1ft, PFP400 cable with standard N-type plug and reverse polarity N jack connectors