1ft, PFP400 cable with standard N-type plug and reverse polarity N jack connectors

Outdoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 10/6 dBi, 55 deg, panel with reverse polarity type-N plug connector

AP3705i Wall Mounting Bracket

20 inch pigtail with reverse polarity type-N jack, used to connect AP to the LMR cables

75 ft, LMR400 cable with standard N-type plug and standard N-type jack connectors

Cat5e UTP one foot extension cable, RJ45 male (no boot) straight through to female jack.

20 ft, LMR400 cable with standard N-type plug and standard N-type jack connectors

Outdoor, 2.4-2.5/5.15-5.875 GHz, 5 dBi, Omni, Baton (for AP2620/AP3620/AP3640/AP3660)

Universal MB for drop ceiling rails

Outdoor, 5.7-5.8 Ghz, 10dBi, omni baton with reverse polarity type-N jack connector(for AP3660) - FCC domain only

Drop ceiling 9/16rail mounting bracket (verify models supported)

20 inch pigtail with reverse polarity type-N plug to connect AP to lightning protector or directly to antenna

25 ft, LMR600 cable with standard N-type plug and standard N-type jack connectors

Indoor, 2.4GHz / 5GHz, Dual-feed, 5 dBi, 120 deg, Sector antenna (not available in the FCC/NAM regulatory domain)

10 ft, LMR240 cable with reverse SMA plug and reverse SMA jack connectors

1ft, PFP400 cable with standard N-type plug and reverse polarity N plug connectors

6DB ATTENUATOR WITH N-TYPE CONNECTORS

50 foot LMR400 cable with reverse polarity type-N plugs on both ends

10db attenuator with RSMA connectors

Indoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 7dBi, 27/30 deg, panel with reverse polarity SMA plug connectors